# Messages file for SciCalc

Sname:!SciCalc
H1:\TSciCalc application, which provides a scientific calculator.|M\Sopen the calculator \w.
H2:This \w displays information about SciCalc.
H3:\Tscientific calculator.|M\Soperate from the keyboard.
H4:\Rsee information about SciCalc.
H5:\Squit SciCalc.
H6:The last calculation resulted in an error.  Click the "C" key to clear the error.

K0/K1/K2/K3/K4/K5/K6/K7/K8/K9:This key enters the digit %0.
K10:\Senter a decimal point.
K11:\Sperform division.
K12:\Sperform multiplication.
K13:\Schange the sign of the current value (or its exponent).
K14:\Sperform subtraction.
K15:\Sperform addition.
K16:\Scomplete the current calculation.
K17:\Schange between bases, currently %0.
K18:\Sclear the last calculation (but not the memory).
K19:\Sclear a mis-typed value, without losing previous parts of a calculation.
K20:\Sclear the contents of the memory to zero.
K21:\Sstore the current value in the memory (overwriting existing memory contents).
K22:\Srecall the memory contents.
K23:\Scalculate the logical negation (NOT) of the current value.
K24:\Sperform a logical AND on 2 numbers.
K25:\Sperform a logical inclusive OR on 2 numbers.
K26:\Sperform a logical exclusive OR on 2 numbers.
K27:\Tpercentage key.|MExample uses: 21.5 + 3 % = , 23 % * 496.8 =
K28:\Sgenerate a random number between 0.0 and 1.0.
K29:\Scalculate the cosine of the current value.
K30:\Scalculate the tangent of the current value.
K31:\Scalculate the inverse sine of the current value.
K32:\Scalculate the inverse cosine of the current value.
K33:\Scalculate the inverse tangent of the current value.
K34:\Scalculate factorials of positive integers.
K35:\Scalculate antilogarithms to base 10.
K36:\Scalculate logarithms to base 10.
K37:\Scalculate logarithms to base e.
K38:\Scalculate antilogarithms to base e.
K39:\Scalculate the combination of 2 positive integers.
K40:\Scalculate the permutation of 2 positive integers.
K41:\Stake the square root of the current value (unless negative).
K42:Enter X, then this key, then Y, to evaluate the Yth root of the number X.
K43:\Ssquare the current value.
K44:Click \s then enter a power to raise the current value to that power.
K45:\Sreciprocate the current value (unless zero).
K46:\Senter a numeric exponent.
K47:\Schange between trigonometric modes, currently %0.
K49:\Senter the value pi (3.141592654).
K50:\Thyperbolic key: click before a trigonometric key to calculate a hyperbolic function of the current value.
K51:\Scalculate the sine of the current value.
K52:\Tcurrent value or error message.|M(If you click on it, you will be able to enter numbers from the keyboard.)
K53:\Sperform integer division.
K54:\Sperform a logical NOR (NOT OR) on 2 numbers.
K55:\Scalculate an integer modulus (remainder).
K56:\Sperform a logical NAND (NOT AND) on 2 numbers.
K57:\Sperform a logical equivalence (NOT EOR) on 2 numbers.
K58:Click \s and enter a number to rotate left by that number of bits.
K59:Click \s and enter a number to do a logical shift left by that number of bits.
K60:Click \s and enter a number to do an arithmetic shift left by that number of bits.
K61:Click \s and enter a number to do an arithmetic shift right by that number of bits.
K62:Click \s and enter a number to do a logical shift right by that number of bits.
K63:Click \s and enter a number to rotate right by that number of bits.
K64/K65/K66/K67/K68/K69:This is one of the hexadecimal digits (%0 in decimal).

D0:Click to open brackets.
D1:Click to close brackets.

B1:decimal
B2:binary
B3:octal
B4:hexadecimal

T1:radians
T2:degrees
T3:gradians

M1:Info
M2:Quit
M3:SciCalc

E1:Number too big
E2:Number too small
E3:Invalid factorial input
E4:Invalid operation
E5:Division by zero
E6:Accuracy lost
E7:Floating point exception

ver:SciCalc needs BASIC64 dated 19 Jan 1990 or later
IntErr: (Internal Error %0)
Template:Template '%0' not found

Rad:Rad
Deg:Deg
Grad:Grad

Dec:Dec
Bin:Bin
Oct:Oct
Hex:Hex

# Spacing is important here.
title:       SciCalc (%0)  %1